2
SL-23185QS10_Rev0_09-2012
The Liebert
®
GXT3
™
8000-10000 VA models ship without the internal battery installed. Located the internal battery kit,
model number GXT3-288RTBKIT, and follow these steps to install the battery.
1. Loosen and remove the screws on the battery door and remove the battery door and set aside the screws and
door for reassembly
2. Insert the two battery trays and connect the plugs to the mating receptacles
3. Gently push the battery wiring into the compartment making sure that the wiring will not be pinched when the
battery door is reinstalled.
4. Reinstall the battery door and secure using the screws that were removed in step 1.
5. Locate the plastic bezel from the shipping box and attach the bezel to the UPS taking care to align the fastening
clips on both ends before inserting them into the holes.
6. If your application requires the use of external battery cabinets for longer back up time requirements, connect the
first battery cabinet to the UPS with the cable provided with the battery cabinet.
Note: it does not matter which
connector is used on the battery cabinet
. If more than one battery cabinet is used the additional cabinets then
connect to the adjoining battery cabinet.
Optional POD
Cover
(Replace with POD)
External Battery
Cabinet Connectors
for
GXT3-288RTVBATT
Input / Output
Conduit Box
Input Circuit Breaker
Maintenance
Bypass Breaker
Output Circuit Breaker
Battery Kit Handle
Internal Battery Kit
(1 of 2)
GXT3-288RTBKIT
Liebert GXT3 UPS
GXT3-8000RT208
or
GXT3-10000RT208
