www.lieber-rc.com
4
2.0 Get to know your aircraft
2.1
Drone 280mm FPV Racing Mini Quadcopter
Drone 280mm uses an all-in-one flight control system,
compatible with the mainstream transmitters for example JR,
Futaba.
Specifically chosen to run 2204~2150KV motors with 6 inch
propellers, to reach exciting new speeds.
Due to the use of extremely lightweight pure carbon fiber material
and the all-in-one flight control system, allows for the flight weight
to be as light as 340~360g (not including battery).
This means you will be able to accelerate quick off the mark,
remarkably responsive and stable flight.
The frame is of the X4 model, the diameter between the motors is
280mm.
The thickness of the fuselage is only a meer 1.5mm, pure carbon
fiber supports for lightweight but a strong structure.
The arms all have a thickness of 3mm, also made from carbon fiber.
Newly researched all-in-one flight control system includes the
following functions:
4x 20A speed controller (Simon K oneshot settings installed)
Adjustable 32 channel 5.8G-600MW video transmitter
OpenPilot CC3D flight controller~ Adjustable LED power output
Adjustable on/off echolocation device
5V or 12V FPV camera power and video output
input power built in XT-60 socket
The all-in-one flight control system reduces the need for
complicated soldering hence trimming down the weight of the
wires resulting in extraordinary performance.
Components required for normal flight:
3~4S 1400~2300mAh Lipo Batteries (flight time 5~9minutes)
At least 5 channels or above transmitter with mini receiver
Components required for FPV flight:
At least 5 channels or above transmitter with mini receiver
21x21mm camera with 5V or 12V input
5.8G video output device with receiving capabilities
Содержание Drone 280
