H151-00-1 17-11-23
liden-weighing.se
Assembling the Scale
Insert the bottom pillar to the scale
platform, using the studs as guides
•
Take care NOT to catch the load
cell cable between these parts.
•
Pay attention that there are two
screw holes on the bottom pillar,
which on assembly needs to be
position upward.
Insert the four M5 screws and tighten
them in place with Phillips screwdriver
From the “PARTS INSIDE” box, take out
the two wheels and the hinge.
Place each wheel on the hinge and
assemble them in the grove, locking in
place using the M5 screw and a Phillips
screw-driver.
Insert the upper pillar into the bottom
pillar.
•
Take care not to damage the
load cell cable. Insert the extra
cable into the bottom pillar.
•
Insert the height rod edge into the
appropriate rail
•
Secure the upper unit assembly by
screwing the two (2) M4 screws in the
back of the unit.
X4
3
2
2
1
1