LIBRETTO RC21.11, Руководство пользователя, Страница: 45 / 48

45
(default Display).
6.4.4 ROOM SENSOR ADJUST
This value is used to correct the reading of room
temperature by the device inner probe. Range
-3.0÷3.0°C (default 0.0°C).
6.4.5 FACTORY SETTINGS
Selecting this voice, the Confirm Request will
appear. Confirming the request, all parameters
and setting, local set, time scheduling, status and
programs in use, including the temporary functions
(temporary / holidays) will be restored to factory
values.
6.5 SPECIAL PROGRAMS
This menu allows managing the Holiday program and
GSM Program.
6.5.1 HOLIDAY PROGRAM
During this period, the system will work in a similar
way to status Off. Functions Hot Water as well
as Room Heating will be inhibited (if enabled,
Antifreezing function will be guaranteed). Entering
the page, it will be possible to modify the time
interval for this function. Rotating the knob it is
possible to change the highlighted value and confirm
it through pressure, going to the next parameter.
The program will be activated setting the voice
Active Holiday: YES
and confirming through button
Confirm .
6.5.2 GSM PROGRAM
The value “YES” means that the entrance to GSM
function is enabled (connect also the terminal –
picture 2). When the contact is closed, the system
makes a heating request (Winter) with program and
Manual Set, it also activates the level of Hot Water
comfort, apart from the status and the initial setting
(default “No”).
6.6 TECHNICAL MENU
This Menu contains regulation information and parameters
reserved to Technical Assistance. As a consequence, it is
protected by password .