7
fig .6
HOME DEFENDER SERIES
SMART VAULT
5
STEP
OPEN THE SMART VAULT
using the fingerprint sensor
WHEN USING A/C ADAPTER
Place finger above the fingerprint sensor.
Drag or slide the finger that you have
previously enrolled across the fingerprint
sensor (
Ref Fig 5 & 6)
. It is important to
drag or slide your enrolled finger exactly
as you did in the enrollment process
The fingerprint sensor scans the finger
and compares it to any and all stored
fingerprints. The door will open quickly
when a match is found. Interior light will
stay on for 30 seconds.
WHEN USING BATTERY POWER ONLY
When using the battery power only, a brief sensor “wake-up” period will occur.
A YELLOW light will appear indicating that the sensor is ready for you to slide your
finger (
Ref Fig 5
& 6
). The door will open quickly when a match is found. Interior
light will stay on for 10 seconds.
Red/Yellow/Green
Simultaneous Flash
: Memory cleared successfully.
Red Solid
:
The SMART VAULT needs you to reswipe your finger.
Red Continuous Slow Flashing
:
The HDX-250 SMART VAULT‘s battery is
low and requires changing.
Red Rapid Flashing
: Your finger print scan was unsuccessful or the function
that you were trying to perform has timed out.
Yellow
: The HDX-250 SMART VAULT is asking for a fingerprint swipe.
Green
: The HDX-250 SMART VAULT has A/C power.
Yellow Flashing (Tamper Alert)
: The yellow light will flash for 10 seconds
reporting that there has been an attempted entry by an unauthorized person or
persons. This Tamper Alert only occurs after a successful scan by an authorized
person.
LIGHT INDICATIONS
