4
ASSEMBLY
NOTE:
Most parts are assembled by locking tabs on
the mating parts. The locking tab must slide down
into the snap as shown in the figures below.
3.
Press the exit tube
(D)
into the snaps on the right
or left reel side
(B)
as shown in the figure below.
2.
Install the side frame
(E)
onto the upper and lower
frame bars
(F)
and
(G)
as shown.
4.
Align cross brace
(A)
tabs with the left reel side
(B)
and assemble as shown.
1.
Align and slide the locking tab on lower frame bar
(F)
with the snap on side frame
(E)
until an audible
click sound is heard. Repeat the same steps for
upper frame bar
(G)
.
NOTE:
When the mating surface tabs and snaps
are flush, the frame bars
(F),(G)
and side frames
(E)
are locked together.
NOTE:
To disassemble a lower frame bar from a
side frame
,
use a flat head screwdriver
to press the
lock tab and slide the frame bar out of the snap.
B
D
F
G
E
A
B
Left
Handed
Crank
Right
Handed
Crank
NOTE:
Make sure
the exit
tube faces
down.
D
B
NOTE:
Ensure the locking tabs and snaps engage
and an audible snap is heard when the frame bars
and side frame are assembled.
