TOOLS REQUIRED
PARTS LIST
Estimated assembly time: 5 minutes (Not including mounting)
A.
Crank Handle (1)
B.
Allen Screw (1)
D.
Hose Reel (1)
2
1. Align the holes in the crank handle
(A)
with crank handle shaft.
Tighten using the Allen Wrench and screw
(B)
. Do not over
tighten crank handle Allen Screw.
Figure 1
2. Attach the Leader Hose
(C)
to the swivel connector.
Figure 2
Note:
If you have trouble with the swivel turning and kinking the leader
hose, try spraying a silicone spray inside to lubricate the O-rings. The
O-rings located inside the swivel may be dry. You can reach the O-rings
by taking off the retaining clip.
3. Turn the crank handle
(A)
to align hose guide
with water hose connection located on spool
(D)
.
Insert garden hose through the hole and fasten
water hose tightly to the fitting.
Figure 3
•
DO NOT
leave water running through the hose
reel unsupervised.
•
DO NOT
expose the reel to freezing temperatures
with water remaining in the unit.
.
• Turn water off after each use.
ASSEMBLY INSTRUCTIONS
Pliers, Adjustable Wrench, Hammer or Power Drill (Not included) & Allen Wrench (Included)
C.
Leader Hose (1)
A
B
C
FIGURE 2
FIGURE 3
IMPORTANT:
LAY OUT ALL PARTS AND FASTENERS. MAKE SURE ALL PARTS ARE ACCOUNTED FOR. IF ANY PART IS
MISSING PLEASE CONTACT LIBERTY GARDEN PRODUCTS AT
1-866-820-5805, MONDAY - FRIDAY 9 A.M. - 5 P.M. EST.
DO NOT CONTACT THE RETAILER.
YOU CAN ALSO VISIT OUR
WEBSITE, WWW.LIBERTYGARDENPRODUCTS.COM,
FOR MORE INSTRUCTIONS, PICTURES AND HELPFUL HINTS.
C
D
FIGURE 1
A
D
B
A
D
D
