DL-DMP-A Deployment Guide
8
Installation Instructions
Connect to LAN
Connect a Cat5e cable to the LAN port of the DL-DMP-A to a local area network that supplies an Internet
connection. The DL-DMP-A defaults to DHCP mode so the device must be connected to a router / DHCP server.
If connecting the DL-DMP-A player to a LAN wirelessly, attach the supplied antenna to the side of the DL-DMP-A
before the device is powered on. When the player is powered on, you can connect to an SSID using the Android
operating system
SETTINGS
option.
Connect HID Devices
Connect Display
To navigate the Android operating system you can connect the DL-DMP-A to a touchscreen display using a USB
connection to the touchscreen display or you can connect a USB mouse and keyboard to either USB port on the
media player.
Connect a display device to the HDMI output of the DL-DMP-A using a High Speed HDMI cable that is less than
or equal to 5 meters for 1080p signals. For a display device that is further away, it is highly recommended to
install an HDMI extender such as the Digitalinx DL-HD70, DL-HDE100, DL-HDE100-H2 or the DL-HD2100.
The DL-DMP-A can be used an HDMI source for any switcher or HDMI distribution system. The DL-DMP-A is not
output an HDCP encrypted source.
Connect the included power supply to the DL-DMP-A, then connect the power supply to local power source.
Apply Power
