Libelium Waspmote Plug & Sense! 4-20 mA Current Loop Скачать руководство пользователя

Страница: 18 / 144

-18-

v8.6

Sensor probes

6.1. Sensor probes types

Libelium provides many different sensor probes depending on what is going to be measured. This section

describes main features of each type. If further information is required, please refer for the corresponding sensor

board guide available on

Libelium website

Standard type

This sensor probe is the most common. The sensor is placed inside a plastic cylinder acting as a protection against

rain and water, but allowing sensor interact with environment to measure necessary parameters. Besides, the

sensor is kept always straight and the size and shape of the probes are standardized as maximum as possible.

Figure: Standard sensor probe

Sensor probes of this type are all the gas sensors of the Smart Environment and the Smart Environment PRO

models (except for the temperature, humidity and pressure sensor and the particle matter sensor).

White protection probe

This probe is designed to reduce sunlight effects and prevent from water and rain, but allowing humidity

measurement.

Only the temperature, humidity and pressure sensor include this special protection.

Figure: Temperature, humidity and pressure probe

Содержание Waspmote Plug & Sense! 4-20 mA Current Loop

















































































































































Результаты поиска

Содержание Waspmote Plug & Sense! 4-20 mA Current Loop

Отзывы:

Похожие инструкции для Waspmote Plug & Sense! 4-20 mA Current Loop

Бренды по названию

Популярные бренды

Libelium Waspmote Plug & Sense! 4-20 mA Current Loop, Техническое руководство

Результаты поиска

Содержание Waspmote Plug & Sense! 4-20 mA Current Loop

Отзывы:

Похожие инструкции для Waspmote Plug & Sense! 4-20 mA Current Loop

Бренды по названию

Популярные бренды