-3-
Meshlium
1. Introduction
The aim of this manual is to introduce the user to Meshlium in a practical way.
This document applies to the following Meshlium model, approved for FCC and IC:
Model
FCC ID
IC
Meshlium 4G 802.15.4 AP 900 US
XKM-MESHLIUM-V1
8472A-MESHLIUMV1
2. Meshlium general and safety information
The following list shows just some of the actions that produce the most common failures and warranty-voiding cases.
Failure to comply with the recommendations of use will entail the guarantee cancellation.
Software:
1. Use the Meshlium Manager web application in order to configure and setup Meshlium.
2. If you use the Manager System, you can always go to the default configuration by clicking the “Presets” button.
3. Do not interrupt the power supply before shutting down Meshlium properly through the “Shutdown” or “Restart” buttons
in the Manager System. If you do not do so you may take the system corrupted.
Hardware:
1. Do not open the Meshlium enclosure in any case. This will automatically make the warranty void.
2. Do not handle the numbered metallic seals in the screws of Meshlium: their integrity is the proof that the Meshlium
enclosure has not been opened. If they have been handled, opened or broken, the warranty is void.
3. Do not submerge Meshlium in liquids.
4. Do not place Meshlium on places or equipment where the device could be exposed to shocks and/or vibrations.
5. Do not expose Meshlium to temperatures below -20 ºC or above 50ºC.
6. Meshlium’s microprocessor must not overpass 70 ºC. The user must make sure that this temperature is never reached.
7. Do not power Meshlium with other power sources than the original provided by Libelium.
Содержание Meshlium
Страница 1: ......
