-7-
v7.0
Device description
2.3.2. Join screen
The device is configured to join the network using Over the Air Activation (OTAA). It starts a join request session
(JRx) and shows the frequency, SF and power used during this session. When the product receives a Join Accept (JA)
from the network, the information is displayed on the screen and the product switch to the main screen (uplink/
downlink).
Figure: Join screen (join request and join accept)
The requests are identified with “JR” followed with a number showing the number of requests done. The frequency
used for the request is shown after this information.
Item
Icon
Description
RF status
No icon
The JOIN phase is completed and the dev
ice is operational on the network
The device is in JOIN phase, and is trying to
connect to the network