1) Loosen the Surface Screw and open the Housing. Knock out appropriate Slots
when mounting to Junction Box. (Not supplied)
2) Using the Leveling Bubble in the Wall Mounting Box and level it.
3) Feed supply wires through Junction Box, Gasket and Wall Mounting Box. Check
the Gasket is fully sealed.
4) As the picture shows
，
fix the Housing on the Wall Mounting Box for
hands free wiring.
5) Wire the Power Wire on the Housing using provided wire connectors.
INSTALLATION STEPS
LED Outdoor Security Light
LT-XT-06 Installation Instructions
①
②
