manualshive.com logo in svg

LI-COR LI-800, Инструкция по эксплуатации, Страница: 3 / 76

Поделиться
Скачать
LI-COR LI-800 Скачать руководство пользователя страница 3

ii

NOTICE

The information contained in this document is subject to change without notice.

LI-COR MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  LI-COR shall not be liable for
errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.

This document contains proprietary information which is protected by copyright.  All rights are reserved.  No part of this document may be
photocopied, reproduced, or translated to another language without prior written consent of LI-COR, Inc.

© Copyright 1998, LI-COR, Inc.
Publication Number 9810-123

Printing History

New editions of this manual will incorporate all material since the previous editions.  Update packages may be used between editions which
contain replacement and additional pages to be merged into the manual by the user.

The manual printing date indicates its current edition.  The printing date changes when a new edition is printed.  (Minor corrections and updates
which are incorporated at reprint do not cause the date to change).

LI-COR, Inc. 

●

 4421 Superior Street 

●

 Lincoln, Nebraska  68504

Phone: 402-467-3576 

●

 FAX: 402-467-2819

Toll-free: 1-800-447-3576 (U.S. & Canada)
e-mail: [email protected] 

●

 www.licor.com

Содержание LI-800













































































Отзывы:

Нет отзывов