Operation Summary
7
7.
Press
MULT SELECT
if you wish to display the second
multiplier. NOTE: Pressing
MULT SELECT
before
pressing
CAL
(step 6) discards any changes you have
made to the multiplier currently shown on the display.
8.
Edit the second multiplier following steps 5-7 above.
9.
Press
CAL
again to store the displayed multiplier value
and units label and use them to take measurements.
Note that pressing
CAL
when in measurement mode will
display the multiplier in current use. The multiplier dis-
played when
CAL
is pressed again will be stored as the
active multiplier, whether you have changed it or not.
While in measurement mode, you can press
HOLD
to retain
the current reading on the display, until the
HOLD
key is
pressed again.
Press
AVG
to perform a 15 second average, which will be
displayed in Hold mode. Press the
HOLD
key to resume
measurements.
Press the
OFF
key to turn the power off. The LI-250 will
automatically shut off after 25 minutes of inactivity in
measurement mode.
