manualshive.com logo in svg

LI-COR LI-190SA, Инструкция по эксплуатации, Страница: 28 / 30

Поделиться
Скачать
LI-COR LI-190SA Скачать руководство пользователя страница 28

27

Warranty

Each LI-COR, inc. instrument is warranted by LI-COR, inc. to be free from
defects in material and workmanship; however, LI-COR, inc.'s sole
obligation under this warranty shall be to repair or replace any part of the
instrument which LI-COR, inc.'s examination discloses to have been
defective in material or workmanship without charge and only under the
following conditions, which are:

1.

The defects are called to the attention of LI-COR, inc. in Lincoln,
Nebraska, in writing within one year after the shipping date of the
instrument.

2.

The instrument has not been maintained, repaired or altered by anyone
who was not approved by LI-COR, inc. 3.  The instrument was used in
the normal, proper and ordinary manner and has not been abused,
altered, misused, neglected, involved in an accident or damaged by act
of God or other casualty.

4.

The purchaser, whether it is a DISTRIBUTOR or direct customer of
LI-COR or a DISTRIBUTOR'S customer, packs and ships or delivers
the instrument to LI-COR, inc. at LI-COR inc.'s factory in Lincoln,
Nebraska, U.S.A. within 30 days after LI-COR, inc. has received
written notice of the defect.  Unless other arrangements have been
made in writing, transportation to LI-COR, inc. (by air unless otherwise
authorized by LI-COR, inc.) is at customer expense.

5.

No-charge repair parts may be sent at LI-COR, inc.'s sole discretion to
the purchaser for installation by purchaser.

6.

LI-COR, inc.'s liability is limited to repair or replace any part of the
instrument without charge if LI-COR, inc.'s examination disclosed that
part to have been defective in material or workmanship.

There are no warranties, express or implied, including but not limited
to any implied warranty of merchantability of fitness for a particular
purpose on underwater cables or on expendables such as batteries,
lamps, thermocouples, and calibrations.

Other than the obligation of LI-COR, inc. expressly set forth herein,
LI-COR, inc. disclaims all warranties of merchantability or fitness for a
particular purpose.  The foregoing constitutes LI-COR, inc.'s sole
obligation and liability with respect to damages resulting from the use
or performance of the instrument and in no event shall LI-COR, inc. or
its representatives be liable for damages beyond the price paid for the
instrument, or for direct, incidental or consequential damages.

Содержание LI-190SA































Отзывы:

Нет отзывов