LI-COR 5700-DS, Руководство по аксессуарам

Страница: 9 / 20

Pearl® Imager Accessories
3) Connect the tube from the port labeled “OUT” on the rotameter to the port labeled “IN” on the
back of the docking station. The gender of the connector prevents connection to the wrong port.
Figure 1-3. Docking station back panel.
4) Connect the tube from the port labeled “EXHAUST” on the rotameter to the port labeled “OUT”
on the back of the docking station.
5) If using the Pearl Clean Box, connect one of the provided HEPA filter assemblies (packaged with
the Clean Box) to the port labeled “IN” on the rotameter. The gender of the connector assures
the filter will be plugged-in in the correct orientation.
Figure 1-4. Docking station rotameter with HEPA
filter assembly installed between the IN port on the
rotameter and the anesthesia gas supply tube from
the vaporizer.
Page 3