LGMG SR1018D, Руководство по эксплуатации

Страница: 107 / 109

Elevating Work Platform Operation Manual
100
10.1 Compliance
1) When the machine is lifted by a crane or
forklift, keep normal judgment and planning
to control the movement of machine.
2) Only personnel with high-altitude lifting
qualifications can load and unload the
machine.
3) The transport vehicle must be parked on a
level surface.
4) When loading the vehicle, the transport
vehicle must be fixed to prevent movement.
5) Make sure the transport vehicle's capacity,
loading surface, chains or belts are
sufficient to withstand the weight of the
vehicle. Refer to the nameplate for the
weight of the vehicle.
6) Before releasing the brakes, the machine
must be on level ground or have been
secured in place.
7) 6) Do not drive the vehicle on a slope that
exceeds the vehicle's uphill, downhill or
slope rating. Refer to “Drive on the Slope”
in the “Operation Instructions” section.
8) If the slope of the transport vehicle exceeds
the maximum slope rating, the winch must
be used to load and unload the vehicle as
specified.
9) Prevent the plug from falling from the
guardrail when it is taken off. Grasp the
guardrail firmly when folding it.
10.2 Securing on Trucks or
Trailers During
Transportation
1) Always lock the wheels of the platform
when preparing for transportation.
2) Secure the machine on the transport
surface using the fastening positions on the
chassis.
3) Use at least 4 chains or belts. Ensure each
chain or belt has sufficient load strength.
4) Turn the key switch to the "Off" position and
remove the key before transportation.
10.3 Ensuring Transportation
Safety
1) Always lock the platform wheels when
preparing for transportation.
2) Retract and secure the extension platform.
3) Before transportation, turn the key switch to
the "Off" position and remove the key.
4) Thoroughly check the machine for any
loose or unsecured components.
5) Secure the machine on the transport
surface using the fastening positions on the
chassis.
6) Use at least 4 chains or belts.
7) Ensure each chain or belt used has
sufficient load strength.
8) If the railing has been folded, use a belt to
secure it before transportation.
Compliance
1) Only qualified rigging personnel are
allowed to assemble slings and lift the
platform.
2) 2) Make sure that the crane's lifting
capacity, loading surface, belt or rope is
sufficient to withstand the weight of the
vehicle. Refer to the decal and nameplate