LGMAquari LGs1260 Скачать руководство пользователя страница 3

3

1. Assembly

Dear customer, 
congratulations for buying your new skimmer.
We share a passion for aquariums. To put the life of your aquarium into the hands of a  sturdy and easy 
to use product is crucial. This is why we have always tried to design the ever best products.

LGMAquari

 's equipment is a synonymous of quality, reliability and ease of use. 

BRead these simple instructions to appreciate 

LGMAquari

 experience and use your new skimmer to 

the best.

Geppy Apuleo - 

LGMAquari

 

Product Manager

Do not power the pump if dry. You may damage it.

!

www.lgmaquari.it | [email protected]

To lower any noise from the clean water outlet      , it’s better to 
use a pipe with a diameter the same as the drain hole’s and long 
enough to take the drain outlet to the most appropriate place. 
Plug a “T”joint with one hole upward-facing; another vertical pipe 
can be plugged into the “T” joint and immersed into 2cm (< 1”) 
water so that the drain outlet will become totally noiseless. If you 
use a 90° joint instead of a “T”, to maintain proper stability of use, 
it will not be possible to immerse the vertical pipe in any case. 

LGMAquari

 's skimmers are equipped with an exhaust system which is adjustable in height      . 

This type of exhaust allows to customize the skimming, changing the amount of treated water without 
changing the water level inside the contact column      . This will avoid any wrong bottleneck.
Always keeping the water level in the contact column A   at the right level and the drain outlet  5  free 
from any obstruction are the essential requirements to keep the skimmer properly working.

“T” Joint , 90° joint mounted as silencer

v.1.1 ENG | 450~3000 | 03-2014

O-Ring

* Silicon Grease is  included only for some countries

** Available only on selected models

*** Water intake pump NOT included

Grase the inner O-Ring        with silicon grease* 
Grease with silicon grease* the inner O-Ring where        is normally housed
Install        &         on        . Do not over tighten the thread
Install        ** 
Install        and plug it into 
Install the water intake pump*** & plug it into       . Please, use a soft rubber pipe
Connect    if  ** if an external waste system is available

1
2
3
4
5
6
7

Содержание LGs1260










Отзывы: