40
11 - STRIPPING AND SCRAPPING
11. STRIPPING AND SCRAPPING
If stripping and scrapping of the machine is required, relative rating plates
and all related documents must be destroyed or cancelled. If the machine is
to be scrapped by third parties, only authorised centres are to be used for
any waste recovery or disposal of the ensuing materials.
If the machine is to be scrapped directly by the user, it is important that the
materials are split according to their category and then disposed of
separately through specialised centres.
All metal parts, the electrical motor, rubber parts and all the parts made out
of synthetic materials must be separated for recycling. Scrapping must at all
times be carried out in full conformity with prevailing laws in the country of
use wherefore any liability for non compliance with any local requirement lies
solely with the last proprietor of the machine and/or any appointed nominee.
L.G.L. Electronics will not be held liable for any damage or injury
whatsoever arising from reuse of any one of the machine components for
operations or assemblies that do not in any way conform to the original use
the machine was intended for.
02_ECOpower_Rv0_ENG@01# 28/08/14 18.26 Pagina 40
