LGC wireless InterReach Fusion SingleStar Скачать руководство пользователя страница 84

Страница: 84 / 154

Fusion SingleStar Installation Procedures

6-10

InterReach Fusion SingleStar Installation, Operation, and Reference Manual

CONFIDENTIAL

D-620605-0-20 Rev A

Installing a Fusion SingleStar Hub Using the 12” Wall-Mounted
Bracket

Considerations:

• The rack-mounting brackets on the Fusion SS Hub must be moved to the recessed

mounting position to allow for the required 76 mm (3 in.) rear clearance.

• • The maximum weight the bracket can hold is 22.5 kg (50 lbs).

• • The bracket is designed to accommodate a Fusion SS Hub (21 lbs.) and a Smart-

Source Adaptive Processor Unit.

• The wall mount bracket should be securely mounted to wall, using the four key slot

mounting holes on the bracket.

To install the Hub directly to the wall:

Attach the wall bracket (PN 4712) to wall the using #10 Pan Head wood screws,
1-1/2” minimum length for mounting in wood studs or 3/4“ thick plywood.

The bracket must be positioned so that the Hub will be in a horizontal position
when it is installed. (Refer to Figure 6-1.)

Figure 6-1

Installing in the Recessed Mounting Position

Содержание InterReach Fusion SingleStar



























































































































































Результаты поиска

Содержание InterReach Fusion SingleStar

Отзывы:

LGC wireless InterReach Fusion SingleStar, Инструкция по установке и эксплуатации, Страница: 84 / 154

Результаты поиска

Содержание InterReach Fusion SingleStar

Отзывы: