21
EXTERNAL EQ
UIPMENT SETUP
VCR SETUP
To avoid picture noise (interference), leave an adequate distance between the VCR and TV.
If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the
screen. This phenomenon is common to all TVs and is not covered by warranty.
Antenna Connection
1. How to connect
2. How to use
Set VCR output switch to 3 or 4 and then tune TV to the same channel number.
Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.)
Connect the RF antenna out socket of the VCR to the
ANTENNA/CABLE IN
socket on the TV.
Connect the antenna cable to the RF antenna in socket of the VCR.
Wall Jack
Antenna
Zenith.book Page 21 Wednesday, April 2, 2008 11:46 AM
