LG XD3 15 Series Скачать руководство пользователя страница 49

Страница: 49 / 56

Cleaning the Water Supply

Hose Filter

Unplug the appliance.

Turn off the water tap.

Unscrew the water supply hose.

Remove the seal and the plastic filter with a

pair of small pliers or scissor grips.

Refit the filter and gasket and make sure

that it is sitting correctly.

Refit and secure the water supply hose in

reverse order. Do not use any mechanical

device to tighten the hose. A soft cloth can

be used to assist hand tightening.

NOTE

•

A filter is fitted into the inlet of the water

supply hose connection.

•

If insufficient water flows into the appliance,

check that the filter is not blocked.

•

If there is a leak, the water supply hose will

need to be checked for proper connection.

•

Never over tighten the water supply valve or

use mechanical devices to tighten.

•

When reassembling the seal and the filter,

ensure that they free from dirt or grit that may

have come from the water supply.

Содержание XD3 15 Series

























































Результаты поиска

Содержание XD3 15 Series

Отзывы:

Похожие инструкции для XD3 15 Series

Бренды по названию

Популярные бренды

LG XD3 15 Series, Руководство пользователя

Результаты поиска

Содержание XD3 15 Series

Отзывы:

Похожие инструкции для XD3 15 Series

Бренды по названию

Популярные бренды