9
Operation
Compatible Devices
1. Devices which require additional program
installation when you connect it to a computer,
are not supported.
2. MP3 Player : Flash type MP3 player.
•
The MP3 player requiring installation of a driver
is not supported.
3. USB Flash Drive : Devices that support
USB2.0 or USB1.1.
Basic Playback
1. Connect the USB device to the USB connec-
tor of your unit.
2. Press
USB
to select USB function.
“CHECKING” appears on display window, and
then the total number of files is displayed.
3. Press
B
B
/
[]
(PLAY/PAUSE)
.
In addition, you can also play using the
NUMERIC
buttons.
To Remove the USB from the unit
1. Press
FUNCTION
repeatedly to select other
modes.
2. Remove the USB from the unit.
Note:
Besides Basic Playback, if you want to operate
other functions, see the CD Playback section.
Moving to other cards
In case that more than two memory cards are
connected to the USB port, press
D.SKIP
to
select a card you want to use.
Notes:
• Do not extract the USB device while in
operaton.
• A back up demands to prevent a data damage.
• If you use a USB extension cable or USB hub,
the USB device might not be recognized.
• A device using NTFS file system is not
supported (Only the FAT (16/32) file system is
supported).
• The USB function of this unit does not support
all USB devices.
• Digital camera and mobile phones are not
supported.
• This unit is not supported when the total
number of files is 1000 or more.
TAPE Function
Basic Playback
1. Press
FUNCTION
to select TAPE function.
2. Load a tape.
3. Press
B
B
or
b
b
.
To Stop Play
Press
x
x
STOP
during playback.
To Play Rewind or Fast Forward
After pressing
bb/BB
during playback, or stop,
press
B
B
or
b
b
at a point you want.
AUTO REVERSE DECK
You can select the direction of the tape you want
by pressing
PLAY MODE
.
Tape Recording
Wind the tape to the point recording starts.
Use only normal tapes.
Basic Setting
1. Select the function (FM/AM, CD, USB, AUX or
PORTABLE) you want to record.
2. Open the cassette deck and insert a blank
cassette into the cassette compartment.
Recording from Radio, USB, CD, PORTABLE
or Auxiliary source
1. Press
FUNCTION
to select a mode in which
you want to record.
2. Press
z
/
[]
, then “REC” blinks and the device
is on standby.
3. Press
z
/
[]
again to start recording.
4. Press
x
to cancel recording.
Note:
On recording, press
z
/
[]
to pause.
CD to Tape Synchronized Recording
The CD synchro recording function dubs a com-
plete CD and programmed titles automatically
onto a cassette.
1. Press
FUNCTION
to select CD function.
2. Press
CD SYNC
in stop mode.
“REC” flashes and “CD SYNC” indicator lights.
3. The synchronized recording is started
automatically after about 7 seconds.
Notes:
• If you wish to record from the desired track,
select the desired track with
.bb
/
BB>
(
CD SKIP/SEARCH
) before commencing CD
synchro recording.
• You cannot change any mode during recording.
Function
After the TAPE plays the front or reverse
(backward play) side, stops automatically.
After the TAPE plays the front and reverse
side, stops automatically.
After the TAPE plays six times repeatedly
the front and reverse side, stops automat-
ically.
Display