manualshive.com logo in svg

LG X130 Series, Руководство по обслуживанию, Страница: 16 / 92

Поделиться
Скачать
LG X130 Series Скачать руководство пользователя страница 16

16

Chapter 3. System information

External I/O Interface

• External VGA Monitor Port: 1
• Microphone: 1
• Microphone Input Port (Mic in): 1
• Headphone Port: 1 
• USB 2.0 Ports: 3
• Multi-card Slot: 1
• RJ 45 (LAN) Port: 1
• USIM Card Slot: 1

※

USIM card slot may not be provided depending on the model.

Video

• Mobile Intel Graphic Media Accelerator 950 (Dynamic Video Memory Technology)

※

The DVMT actively utilizes part of the system memory when processing large graphic data like 3D graphics.

Therefore, the size of the graphic memory is displayed as the sum of the actual graphic memory size and the
utilized amount of memory, which is decided by the size of system memory

. 

※

Applications (graphics program, game, etc.) requiring strong graphic processing power may not work properly.

※

Specifications may differ by model type.

Sound

• Realtek High Definition Audio Codec(ALC262)
• Built

‐

in Stereo Speakers

MODEM

• Ericsson F3607gw (HSPA Modem)

※

The wireless data modem is optional, and so it may not be available in some models.

LAN

• Realtek RTL8102E/RTL8103EL Family PCI

‐

E Fast Ethernet NIC (10/100Mbps)

• RJ 45 Jack

※

The LAN specifications may differ depending on the model.

Wireless LAN

• Ralink RT3090

※

Wireless LAN specifications may differ by model type and cannot be arbitrarily changed by the user.

Weight

• Full Installation: Approx. 1.14kg (3

‐

cell battery pack) / 1.27kg (6

‐

cell battery pack) / 1.54kg

(9

‐

cell battery pack)

• Battery: Approx. 180g (3 cells) / 310g (6 cells) / 470g (9 cells)

※

Weight descriptions may differ by model type.

Содержание X130 Series





























































































Отзывы:

Нет отзывов