25
OPERATION
EN
Time Delay
Use this function to delay ending time. The
appliance will start automatically and finish after a
specified time interval.
1
Press the
POWER
button.
2
Select a washing programme.
3
Press the
Time Delay
button to set the
required delay ending time.
4
Press the
START/PAUSE
button.
NOTE
• This function is the time to the end of the
programme, not the start. The actual running
time may vary due to water temperature, wash
laundry and other factors.
• Reservation can be made up to 18 hours;
- 1 hour interval up to 3 - 12 hours
- 2 hours interval up to 12 - 18 hours
• This function cannot be set for less than 3 hours.
• To cancel this function, press
Time Delay
button
repeatedly until the reservation is cancelled or
press the
POWER
button to turn off and on
power.
Wi-Fi
When WLAN is connected to the appliance, the
Wi-
Fi
f
icon on the control panel is lit.
• Press and hold
Time Delay
button for 3 seconds
to register the appliance in the
LG ThinQ
application.
Remote Start
Use a smartphone to control your appliance
remotely.
• In order to use this function, refer to
SMART
FUNCTIONS
.
Hot Wash / Cold Wash
• Press the
Hot Wash
and/or
Cold Wash
buttons
to select hot water, cold water, or hot and cold
water (warm water).
• If
Hot Wash
is selected, washing will be done
with hot water and rinse will be done with cold
water.
• Under normal and standard user environments,
warm water will enter the drum when both hot
water and cold water are selected.
NOTE
•
Delicates
programme is cold water only. If hot
water is used, the laundry can be damaged.
• Both
Hot Wash
and
Cold Wash
are
automatically selected under
Extra Rinse
and
Tub Clean
programmes.
Child Lock
Use this function to disable the controls. This
function can prevent children from changing
programmes or operating this appliance.
NOTE
• Once this function is set, all buttons are locked
except the
POWER
button.
• When the controls are locked,
CL
and the
remaining time are alternatively shown on the
display during the wash while the child lock is
engaged.
• Turning off the power will not reset this function.
You must deactivate this function before you can
access any other options and functions.
Locking the Control Panel
1
Turn on the power.
2
Press and hold the
Water Level
and
Spin
buttons simultaneously for 3 seconds to
activate this function.
Содержание WTG1034 F Series
Страница 3: ......
Страница 32: ...31 SMART FUNCTIONS EN NOTE For best results do not move the smartphone while the tones are being transmitted ...
Страница 44: ...Memo ...
Страница 45: ......