manualshive.com logo in svg

LG WT5001CW, Руководство по обслуживанию, Страница: 16 / 51

Поделиться
Скачать
LG WT5001CW Скачать руководство пользователя страница 16

16

3-3. FUNCTION OF EACH BUTTON. (WT5101H*)

WASH / RINSE

• Select to select Water (Wash/Rinse)

Temperature.

• Pressing the button allows The selection of

COLD/COLD

▶

WARM/COLD

▶

WARM/WARM

▶

HOT/COLD

▶

EXTRA HOT/COLD

respectively. Default setting is Warm/Cold.

• The following settings are

indicated as the button is pushed

SOAK 

▶

SPIN ONLY 

▶

RINSE+SPIN

• Select COTTON/NORMAL,

HEAVY/DUTY or TOWLES

as the button is pushed SOAK 

▶

STAIN CARE 

▶

SPIN ONLY 

▶

RINSE+SPIN

SPECIAL USE

SOIL LEVEL

• Allows a selection to be make for the strength

of the wash action.

• Power option selections light up in

sequence as follows Normal 

▶

Heavy  

▶

Light  

▶

Normal as the button is pushed.

This can be selected for any program.

• Adjustment can be made while washing.

• Default SOIL LEVEL is Normal.

Note

The time shown on the display is the estimated cycle time. If the sensors and microprocessor elect to
make changes during the cycle, the display will be adjusted accordingly. 

SPIN SPEED

• Spin speed can

be selected from
No Spin to Extra
high.  Default is
Low. 
(refer to  page 24)

SOAK

•  Gives additional soak time.

POWER

• Power on.

• Push again, power goes off

• Power goes off automatically after the wash is

finished.

• After turning the power on, the unit will

automatically turn off if nothing is selected.

LOAD SENSING

• It operates in all program.

• During being detected by the sensor, the  LOAD SENSING

LED flashes.

• It automatically sensing the quantity of laundries.

• During this step, the washing machine select optimized

washing algorithm.

Содержание WT5001CW




















































Отзывы:

Нет отзывов