LG WT4801CW, Руководство по обслуживанию, Страница: 6 / 50

2-2. CONNECTING WATER SUPPLY HOSE
6
WARNING:
1
Attach the water supply hose to the tap.
Push the water supply hose up so that the rubber packing
within the hose can adhere completely to the tap.
2
Connect the water supply hose to the tap.
Connect the water supply hose to the tap and then tighten it by
screwing it to the right.
3
Check water leakage.
After connecting the hose, open the tap to check for
any water leakage.
Connecting Water Supply Hose to the machine
• Connect the water supply hose to inlet valve of
the washing machine, and then lock it by turning
the hose connecting part.
• Check to see if there is a rubber seal inside the
connector.
• A nwe washing machine should be instailed with new
hoses. The old hoses shuld not be reused.
Accessories shown below are not included in this model, but are required
for the proper operation.
• Hot and Cold Water Hoses
• Tie Strap (for securing drain hose)
Screw Type
Water tap
Rubber Seal
Water Supply Hose
Hot
Cold
Water Hose
(to water inlet
on washer)
Rubber Seal
Water Hose
(to tap)
Rubber Seal
Before connecting the Water Supply Hose to the water tap, check the hose type and then choose the
correct instruction here under.