background image

60

LIMITED WARRANTY

Definitions.

 For the purposes of this section, references to “LG” mean LG Electronics U.S.A., Inc., its 

parents, subsidiaries and affiliates, and each of their officers, directors, employees, agents, beneficiaries, 

predecessors in interest, successors, assigns and suppliers; references to “dispute” or “claim” shall include 

any dispute, claim or controversy of any kind whatsoever (whether based in contract, tort, statute, 

regulation, ordinance, fraud, misrepresentation or any other legal or equitable theory) arising out of or 

relating in any way to the sale, condition or performance of the product or this Limited Warranty.

Notice of Dispute.

 In the event you intend to commence an arbitration proceeding, you must first notify 

LG in writing at least 30 days in advance of initiating the arbitration by sending a letter to LG at LG 

Electronics, USA, Inc. Attn: Legal Department-Arbitration 111 Sylvan Avenue, Englewood Cliffs, NJ 07632. 

You and LG agree to engage in good faith discussions in an attempt to amicably resolve your claim. The 

notice must provide your name, address, and telephone number; identify the product that is the subject of 

the claim; and describe the nature of the claim and the relief being sought. If you and LG are unable to 

resolve the dispute within 30 days, either party may proceed to file a claim for arbitration.

Agreement to Binding Arbitration and Class Action Waiver.

 Upon failure to resolve the dispute during 

the 30 day period after sending written notice to LG, you and LG agree to resolve any claims between us 

only by binding arbitration on an individual basis, unless you opt out as provided below. Any dispute 

between you and LG shall not be combined or consolidated with a dispute involving any other person’s or 

entity’s product or claim. More specifically, without limitation of the foregoing, any dispute between you 

and LG shall not under any circumstances proceed as part of a class or representative action. Instead of 

arbitration, either party may bring an individual action in small claims court, but that small claims court 

action may not be brought on a class or representative basis.

Arbitration Rules and Procedures.

 To begin arbitration of a claim, either you or LG must make a written 

demand for arbitration. The arbitration will be administered by the American Arbitration Association 

(“AAA”) and will be conducted before a single arbitrator under the AAA’s Consumer Arbitration Rules that 

are in effect at the time the arbitration is initiated (referred to as the “AAA Rules”) and under the 

procedures set forth in this section. The AAA Rules are available online at www.adr.org/consumer. Send a 

copy of your written demand for arbitration, as well as a copy of this provision, to the AAA in the manner 

described in the AAA Rules. You must also send a copy of your written demand to LG at LG Electronics, 

USA, Inc. Attn: Legal Department-Arbitration 111 Sylvan Avenue, Englewood Cliffs, NJ 07632. If there is a 

conflict between the AAA Rules and the rules set forth in this section, the rules set forth in this section will 

govern. This arbitration provision is governed by the Federal Arbitration Act. Judgment may be entered on 

the arbitrator’s award in any court of competent jurisdiction. All issues are for the arbitrator to decide, 

except that issues relating to the scope and enforceability of the arbitration provision and to the 

arbitrability of the dispute are for the court to decide. The arbitrator is bound by the terms of this 

provision.

Governing Law.

 The law of the state of your residence shall govern this Limited Warranty and any 

disputes between us except to the extent that such law is preempted by or inconsistent with applicable 

federal law.

Fees/Costs.

 You do not need to pay any fee to begin an arbitration. Upon receipt of your written demand 

for arbitration, LG will promptly pay all arbitration filing fees to the AAA unless you seek more than $25,000 

in damages, in which case the payment of these fees will be governed by the AAA Rules. Except as 

otherwise provided for herein, LG will pay all AAA filing, administration and arbitrator fees for any 

arbitration initiated in accordance with the AAA Rules and this arbitration provision. If you prevail in the 

arbitration, LG will pay your attorneys’ fees and expenses as long as they are reasonable, by considering 

factors including, but not limited to, the purchase amount and claim amount. Notwithstanding the 

foregoing, if applicable law allows for an award of reasonable attorneys’ fees and expenses, an arbitrator 

can award them to the same extent that a court would. If the arbitrator finds either the substance of your 

claim or the relief sought in the demand is frivolous or brought for an improper purpose (as measured by 

the standards set forth in Federal Rule of Civil Procedure 11(b)), then the payment of all arbitration fees will 

be governed by the AAA Rules. In such a situation, you agree to reimburse LG for all monies previously 

disbursed by it that are otherwise your obligation to pay under the AAA Rules. Except as otherwise 

provided for, LG waives any rights it may have to seek attorneys’ fees and expenses from you if LG prevails 

in the arbitration.

Hearings and Location.

 If your claim is for $25,000 or less, you may choose to have the arbitration 

conducted solely on the basis of (1) documents submitted to the arbitrator, (2) through a telephonic 

hearing, or (3) by an in-person hearing as established by the AAA Rules. If your claim exceeds $25,000, the 

right to a hearing will be determined by the AAA Rules. Any in-person arbitration hearings will be held at a 

Содержание WSEX200H A Series





































































































Отзывы: