SPECIFICATION
P/No. : 3828EY3049A
How to read the manufactured month and year from the label stuck on the
back of the product.
EX)
4
0 1 T W 0 0 0 0 1
Main service part list : Refer to below listed part name when you need
service call.
Part name
Remark
- WASH MOTOR
- SPIN MOTOR
105 W (Output)
105 W (Output)
PLASTIC
- S.D. BASKET
- CYCLE TIMER ASSEMBLY
- CAPACITOR
- GEAR CASE ASSEMBLY
Serial No.
Product code
Month
Year (The last digit to year)
Power source
ON SPECIFICATION LABEL
Water Level
Water Pressure
Less than 100kPa (1kgf/cm
2
)
Dimension
H : 67 , M : 58 , L : 50 , S : 43
850 530 1017 mm. (W D H)
Weight
For Non-Pump Model 40.5 kg
For Pump Model 41.1 kg
X
X
X X
Washing Machine
MODEL : WP-1080N(P)
WP-1100(N,Q,R)(P)
WP-1130N(P)
OWNER'S MANUAL
Please read the operating instructions carefully
and thoroughly before installing and operating
your washing machine.
This washing machine is designed and manufactured
for household use only.
CAUTION
FEATURES
8
2
3
CAUTION
In Operation
Do not insert the hand inside the spin
dryer basket while the machine is in
operation (Do not let children climb on
the machine or climb into
the tub. Injury may occur.)
Volatile Material
Do not use volatile material such as
Benzene, Gasoline, bug killer.
Do not leave strong alkaline substance
such as bleach inside
the tub. Damage on
plastic surface and
rubber parts may occur.
Be sure to disconnect the power cord
Installation Area
Avoid area exposed to snow,
rain, or where humidity
is high. It may cause
electric shock.
Switch Area
Avoid watering on the
switch area.
It may cause
electric shock
or fire.
Heat
Avoid electric heater, candle light,
cigarette light, bug smoker,
etc. near the machine.
It may ignite or
deform
plastic part.
Hot water
Avoid using hot water
over 50°C. It may
deform plastic parts
or cause malfunction.
Installation
Install the washing machine on
a horizontal support.
Otherwise,
it may cause
vibration and noise.
Power Cord
If the power supply cord is damaged, it
must only be replaced by the
manufacture or its service agent or a
similarly qualified person in order to
avoid a hazard.
Electric Outlet
Connecting the drain hose
Avoid connecting several electric
devices to single outlet. It may cause
fire.
Be sure to earth the washer to prevent electric shock. To reduce
the risk of electric shock, do not install the washer in humid spaces.
Be sure to reroute the hose so that it is not kinked; kinks or sharp
bending in the hose will prevent proper drainage.
Make sure water is draineded smoothly by placing a base under the
machine or by applying other appropriate mean.
For Non-Pump Model
L <= 1 m.
For Pump Model
from the electric outlet before starting
care and maintenance.
Push the clamp toward the body of the washing machine as shown in
the figure.
L
*For Pump Model Only*
DRAIN HOSE
OVERFLOW
FILTER
ROTATION
FILTER-C
TUB
SPIN DRYER
COVER
SAFETY
COVER-2
SPIN DRYER
BASKET
EARTH WIRE
(For models
with two pro-
ng plug)
SAFETY
COVER-1
POWER
CORD
PULSATOR
WASHING
COVER
*For Pump Model Only*
H
D
W
WATER SELECTOR
WASH
Specification
(N,Q,R) : Pulsator Type
(P) : Pump Model Only
1. Water Supply Inlet
Connect here with the inlet hose from the
water faucet to feed water to the tub.
2. Water Selector
Select "WASH" to supply water for
washing and rinsing and "SPIN" for spin
shower rinse.
3. Wash Timer
Select the desired time for washing or
rinsing.
4. Wash Program
Set the program to "GENTLE","NORMAL",
"STRONG" according to kind and
quantity of the laundry.
5. Drain Selector
For Non-Pump Model
Select "WASH RINSE" for washing and
rinsing and "DRAIN" to drain the water out
of the tub.
For Pump Model
Select "WASH RINSE" for washing and
rinsing and "DRAIN" to drain the water out
of Cabinet, and "OFF" to turn off the drain pump.
6. Spin Timer
Select the desired time for spinning. The
maximum limit is 5 min. Don’t rotate the knob
more than prescribed limit.
(See detail in Pulsator Table)
Pulsator Table
Use for WP-****N(P)
Use for WP-****Q(P)
Use for WP-****R(P)
WASH
6
3
4
5
1
2
