manualshive.com logo in svg

LG WM3570H, Руководство по обслуживанию, Страница: 10 / 58

Поделиться
Скачать
LG WM3570H Скачать руководство пользователя страница 10

7 TEST OPERATION

1

Preparation for

washing.

•

Connect the power plug to the
outlet.

•

Connect the inlet hoses. 

2

Press the POWER button.

3

Press the START/PAUSE

button.

•

Listen for a click to determine if the
door has locked.

6

Check the water heating

function.

•

Press the WASH/RINSE button
and  the present temperature will
be displayed.

•

Check if the drum rotates
clockwise and counterclockwise. 

5

Check the automatic reverse

rotation.

4

Check the water supply.

•

Check if water is supplied through
the detergent dispenser.

7

Check the drain and spin

functions.

•

Power off and the power on.

•

Press the SPIN SPEED button.

•

Press the START/PAUSE button.

•

Check the spin and drain functions.

•

Listen for a click to determine if the
door is unlocking.

8

Press the START/PAUSE

button.

9

Water removal

•

If SERVICE is needed during
check, remove the remaining
water by pulling out the hose cap.

10

Содержание WM3570H



























































Отзывы:

Нет отзывов