manualshive.com logo in svg

LG WM2021CW, Руководство пользователя, Страница: 6 / 23

Поделиться
Скачать
LG WM2021CW Скачать руководство пользователя страница 6

INSTALLATION INSTRUCTIONS

6

■

Installation clearances

The location must be large enough to fully open 
the washer door.

■

Washer dimensions

• Most installations require a minimum 4 in. 

(10 cm) clearance behind the washer.

■

Minimum installation spacing for
recessed area installation.

The following dimensions shown are for the minimum
spacing allowed.
Additional spacing should be considered for
installation and servicing.

• Additional clearances might be required for wall,

door and floor moldings.

• Additional spacing of 1 in. (2.5 cm) on all sides of

the washer is recommended to reduce noise
transfer.

Companion appliance spacing should also be
considered.

■

Level floor

• Allowable slope under entire washer is 1°.

• To minimize noise and vibration, the washer

MUST be installed on a solidly constructed
floor.

• Wood floors may need to be reinforced to

reduce noise and vibration.

• Carpeting and soft tile surfaces are not

recommended.

• Never install the washer on a platform or weakly

supported structure.

■

Power outlet

Must be within 60 in. (1.5 m) of either side of the
washer. Do not overload the outlet with more than
one appliance.

[Front view]

[Side view]

27"

(68.6 cm)

29 

3/4

"

(75.6 cm)

38

11/16

"

(98.3 cm)

50 

13/16

"

(129.1 cm)

29 

3

/

4

"

(75.6 cm)

4"

(10 cm)

27"

(68.6 cm)

1"

(2.5 cm)

1"

(2.5 cm)

Содержание WM2021CW
























Отзывы:

Нет отзывов