LG WIT-400H Скачать руководство пользователя страница 25

Страница: 25 / 54

WIT-400H User Manual
Issue: 0.1A

Date: 28/July/2009

This Document Contains proprietary information and may not be reproduced or copied without express
Written permission of a duly authorized representative of LG-Nortel Co.Ltd

Use the side keys to adjust the earpiece, ringer, and key beep volumes. The upper key is used to

increase the volume and the lower key is used to decrease the volume.

You may adjust the earpiece volume during a call.

The ringer volume can be adjusted through the menu.

The key beep volume is adjusted through the menu.

5.1.8 Signal

Strength.

Call quality depends on the signal strength in your area. The signal strength is indicated on the screen as

the number of bars next to the signal strength icon: The more bars, the better the signal strength.

5.1.9 Speed

Dialing.

Speed dialing can be used speed dialing number saved in the phone by pressing digits for 3 seconds

5.1.10 Caller

ID.

Caller ID lets you know who is calling by displaying the number of the person calling when your phone

rings.

5.1.11 AP

Probing.

WIT-400H has an ability to detect all reachable APs. It shows the list of SSIDs configured in the APs.

User can choose one of them under his preference. On the AP probing, please refer to section, 6.5.4.

5.2 Key

Phone

Feature

5.2.1

Transferring the Call

Description

This function is to transfer the current call to another user.

Operation
1. Transfer a current call with dialing the number of CO or ICM.

During a talking

Press Left Soft Key and 5.Transfer menu or

[LEFT]

in navigation key + ‘0’

Dial the number to transfer

(Inform the called station)

Press

[ End ]

(

) to release a call.

Содержание WIT-400H























































Результаты поиска

Содержание WIT-400H

Отзывы:

Похожие инструкции для WIT-400H

Бренды по названию

Популярные бренды

LG WIT-400H, Руководство по эксплуатации

Результаты поиска

Содержание WIT-400H

Отзывы:

Похожие инструкции для WIT-400H

Бренды по названию

Популярные бренды