WIT-300H Installation Manual
Issue: 0.1C
Date:: 30/Jan/05
This Document Contains proprietary information and may not be reproduced or copied without express
Written permission of a duly authorized representative of LG Electronics company
21
A. MFIM configuration
(1) Set the deep switch ‘3’ to ‘1’ as follows.
It means that the MAC address of WIT-300H doesn’t need to be registered in the MFIM. If
the MAC address of the WIT-300H has been registered, MFIM configuration is not
something to be concerned.
B. SSID setting
(1) Enter SSID for wireless networking at “
(MENU) > Settings > Network > 802.1b
Config> SSID”.
User can probe all the APs around the WIT-300H, and choose one of them
at “
Auto
” menu shown here.
After setting these all up, please turn off WIT-300H and then turn it on
.
4. S/W
Upgrade
. The S/W image of WIT-300H composed of three binary files;
wit300hDbg.bin
,
Drv_C.bin
,
Drv_M.bin
.
(1)
wit300hDbg.bin
: It includes H/W support kits; WLAN driver, Operating system core,
DSP/LCD drivers, etc.
(2)
Drv_C.bin
: It is the collection of business S/W; phonebook, Messaging, Screen manipulator,
etc.
(3)
Drv_M.bin
: It is the compressed collection of graphic widgets; icon, bitmap, images, etc.
4.1
USB S/W Downloading
USB is the easiest interface for customer to download S/W image into WIT-300H. Just plugging in a USB
cable into PC keeping the image is a manual job for the downloading. The following “Flash-up” S/W
needs to be installed in the PC.
A. Connecting USB cable
(1) Plug in the USB cable in the PC which Microsoft Windows is installed.
