14
Function of each Button
NOTE
* For optimizing the washing algorithm, the displaying time may be changed during washing-increased by
8minutes at maximum and decreased by 4 minutes at maximum.
* The standard detected by the sensor changing the algorithm is set by the normal standard. It may not be same to
the washing habit of a specific user. So, it does not matter that the user uses it according to her/his washing habit.
* The steam option cannot be used with all cycles.
* Steam may not be clearly visible during the steam cycles.
This is normal. Too much steam could damage clothing.
* Do n
* For
* Whe
leve
* The
Display laundry progress
Time Delay (Reservation)
button
Water wave button
Water Level button
(display detergent amount)
W
Display remaining time, reservation time, and alarm for trouble
• Laundry progress is indicated
here.
• Process to be done will have
light on. Process in progress
will blink and process already
done will have light off.
• Use for laundry
reservation.
• To cancel, turn power
off.
(refer to page 26)
Steam button
• Use for steam.
• Steam can be selected
under Normal,
Whitening, Favorite
course.
• Steam is automatically
selected under Allergy
care course.
• To control water wave.
• Initially set at “medium”
but will not be indicated.
To control Strong wave
power, press Strong
wave. (all course except
Allergy Care, Delicates,
Silent and Tub Clean
can adjust wave.)
• Use to adjust Water Level.
• It can be changed during
operation.
• Add detergent as much as
indicated amount next to
Water Level.
• Detergent is based on
condensed detergent.
Tub Dry Button
• Use this when you
want to dry the empty
tub after a wash.
Buzzer Button
• Pressing the
button allows
OFF
▶
ON.
•
•
•
• During operation this indicates time to finish of laundry.
ex) indicates remaining time of laundry, rinse, spin
dry during operation/pause.
• If there is a trouble, it blinks with buzzer sound and indicates
the source of trouble. It will work normally after
troubleshooting.
• T
• A
• P
t
b
(