34
MAINTENANCE
Empty the water container after every use. Not
doing so will affect the drying performance.
NOTE
• If the water container is full, the
E
icon glows
and a chime will sound while the appliance is
operating. If this should occur, the water
container needs to be emptied within the next
hour.
• When the condensed water is drained out
directly through the optional drain hose, there is
no need to empty the water container.
1
Pull out the water container.
2
Empty the water container into the sink.
CAUTION
• Do not drink the condensed water or reuse it. It
could be lead to health problems for people and
animals.
3
Refit it back into the appliance.
• Push in the water container fully into the
appliance until it is in place.
4
Press the
Start/Pause
button.
Cleaning the Appliance
Periodically
Wiping the Moisture Sensor
This device senses the moisture level of the clothes
during operation, which means it must be cleaned
regularly to remove any build-up of lime scale on
the surface of the sensor.
Wipe the sensors inside the drum.
CAUTION
• Do not wipe the moisture sensor with abrasive
materials. Always clean the sensor with a dry
rough acrylic sponge.
Cleaning the Cool Air Inlet Grill
Vacuum the cool air inlet grill 3 - 4 times a year to
make sure there is no build up of lint or dirt that
may cause improper air flow.
NOTE
• Warm air is expelled through the ventilation grill.
