background image

Important Precautions

NOTE

THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV 
INTRERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS 
EQUIPMENT.SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY 

NOTE

This epuipment has been tested and found to comply with the limits for a class 
B digital device,pursuant to part 15 of  the FCC Rules.These limits are designed 

to provide reasonable protection against harmful interference in a residential 
installation.This equipment generates,uses and can radiate radio frequency

cause harmful interference to radio communications.However,there is no
guarantee that interference will not occur in a particular installation.If this 

which can be determined by turning the equipment off and on,the user is
encouraged to try to correct the interference by one or more of the following
measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and the receiver.
-Connect the equipment into an outlet on a circuit different from that to which 

the receiver is connected.

energy and,if not installed and used in accordance with the instructions,may 

equipment does cause harmful interference to radio or television reception,

TO OPERATE THE EQUIPMENT. 

-Consult the dealer or an experienced radio/TV technician for help.

A3

Содержание W1943 MV Series


























Отзывы: