background image

4

WARNING

IMPORTANT SAFETY INSTRUCTIONS

•  Disconnect the electrical supply before servicing or 

cleaning the unit or when cleaner is not in use. 

Failure to do so could result in electrical shock or personal 

injury.

•  Do not use the vacuum cleaner to pick up anything that is 

burning or smoking such as a cigarette or hot ashes. 

Doing so could result in death, fire or electrical shock.

•  Do not vacuum flammable or explosive substances such 

as gasoline, benzene, thinners, propane (liquids or gases). 

The fumes from these substances can create a fire hazard or 

explosion. Doing so could result in death or personal injury.

•  Do not handle the plug or vacuum cleaner with wet hands. 

Doing so could result in death or electrical shock.

•  Do not try to unplug the vacuum cleaner by pulling on the 

power cord. 

Doing so could result in product damage or electrical shock. To 

unplug, grasp the plug, not the cord.

•  Keep hair, loose clothing, fingers, and all parts of the body 

away from openings and moving parts. 

Failure to do so could result in electrical shock or personal 

injury.

•  The hose contains electrical wires. Do not attempt to use 

the vacuum cleaner if they are broken or damaged. 

Failure to do so could result in death, or electrical shock.

•  Do not allow the product to be used as toy. Pay Close 

attention when product is being used by or near children. 

Failure to to do so could result in Personal injury or damage to 

the product.

•  Do not use the vacuum cleaner if the power cord or plug is 

damaged or faulty. 

Failure to do so could result in personal injury or product 

damage. In the event of the above case, contact LG 

Electronics Australia or a LG Authorised Service Centre to 

avoid any hazards.

•  Do not use the vacuum cleaner if it has become damp or 

wet. 

Failure to do so could result in personal injury or product 

damage. In the event of the above case, contact LG 

Electronics Australia or a LG Authorised Service Centre to 

avoid any hazards.

•  Do not continue to use the vacuum cleaner if any parts 

appear to be missing or damaged. 

Failure to do so could result in personal injury or product 

damage. In the event of the above case, contact LG 

Electronics Australia or a LG Authorised Service Centre to 

avoid any hazards.

•  Do not use an extension cord or a multiple outlet power 

board to charge this vacuum cleaner. 

Failure to do so could result to a fire hazard or product damage

•  Use the correct voltage to charge the unit. 

Using improper voltage may result in damage to the product 

and possible injury to the user. The proper voltage is listed on 

the sticker on bottom of vacuum cleaner.

•  Do not modify the plug in any way. 

Failure to do so could result in electrical shock, personal injury, 

product damage or even death. If plug does not fit into the wall 

socket, contact a qualified electrician to inspect the wall socket. 

If the supply cord is damaged, it must be replaced by the 

manufacturer or one of its authorised service centre's or a 

similarly qualified person in order to avoid a hazard.

•  Repairs to electrical appliances may only be 

performed by qualified service engineers. 

Improper repairs may lead to serious hazards for the user.

• Do not wash the body of the vacuum cleaner with water.
• Do not allow metals to touch the charging terminal or the 

connecting joints of the main body and hose.

• Before cleaning the body, unplug the power cord and turn 

off the main power. Always use a dry cloth to clean the 

body.

•  Do not place the vacuum cleaner near any heat source or 

direct sunlight. 

There is danger of an explosion or a fire.

• When disposing of the vacuum cleaner and/or battery, it 

must be done in accordance with your local council/

government as it contains battery cells that can cause fire 

or explode if not disposed of correctly.

• Do not use the vacuum cleaner in bathrooms.
•  If ever there is a problem with the vacuum cleaner, 

immediately stop vacuuming and turn off the main power 

switch. 

•  Do not use the product at a place subject to lots of 

industrial oil fumes or metal particulates. 

Doing so can cause fire or product failure.

• In the event that the battery ever leaks, avoid contact with 

the skin or eyes. If so,immediately rinse the affected part 

with plenty of water and seek medical attention. 

Battery fluid may cause burns to your skin or loss of eyesight.

•  Do not put fingers near the gear. 

Failure to do so could result in personal injury.

gear

Содержание VR94 series





















Отзывы: