20
How to Use
Cleaning dust separator
- Inside of dust separator, air filter, motor safety filter
If suction power decreases after cleaning the dust tank or alarm sounds, clean the air
filter and the motor safety filter .
The air filter and the motor safety filter are located on the top of the vacuum cleaner as
above the figure.
• Open the vacuum cleaner cover by pushing the button.
• Grasp the handle of the dust separator and take out it.
• Open the guide cover by pulling the guide cover lever and remove the dust.
• Open the air filter cover by pushing the air filter cover lever and take out the air filter.
• Separate the motor safety filter from the dust separator.
• Wash the air filter and the motor safety filter.
• Do not wash filters with hot water.
• Dry fully in shade so that moisture is entirely removed.
• The air filter and the motor safety filter should be cleaned as above the figure.
NOTICE
If filters are damaged, do not use them.
In this cases, contact LG Electronics Service Agent.
Wash filters at least every 3 months.
Air filter
Motor safety filter
Guide cover lever
Air filter cover
Air filter cover lever
Guide cover
Dust separator