20
How to use
Cleaning dust separator
- Inside of dust separator, air filter, motor safety filter
If suction power decreases after cleaning the dust tank or alarm
sounds, clean the air filter and the motor safety filter .
The air filter and the motor safety filter are located on the top of the
vacuum cleaner as above the figure.
• Open the vacuum cleaner cover by pushing the button.
• Grasp the handle of the dust separator and take out it.
• Open the guide cover by pulling the guide cover lever and remove the
dust.
• Open the air filter cover by pushing the air filter cover lever and take
out the air filter.
• Separate the motor safety filter from the dust separator.
• Wash the air filter and the motor safety filter.
• Do not wash filters with hot water.
• Dry fully in shade so that moisture is entirely removed.
• The air filter and the motor safety filter should be cleaned as above
the figure.
NOTICE
If filters are damaged, do not use them.
In this cases, contact LG Electronics Service Agent.
Wash filters at least every 1 months.
NOTICE
If voice guides you “Please clean the dust
filter” from the cleaner after cleaning the air
filter and motor safety filter, please check
the telescopic pipes, flexible hose and the
cleaning tool for blockages or obstructions.
Air filter
Motor safety filter
Guide cover lever
Air filter
cover lever
Air filter cover
Guide cover
Dust separator
When voice guidance indicates “Please clean the dust filter” and red light of Clogging alert display is on and off,
please clean the filter inside after clicking OFF button attached to handle control.
Indicator
