LG Ventilator, Руководство по установке

Страница: 5 / 23

Safety Precautions
Installation Manual 5
Install the air intake where
polluted air can not be
directly sucked in.
• It may cause various accidents,
including suffocation, due to the
suction of harmful gasses(CO, etc.)
Do not install this product in
a refrigerated warehouse,
heated swimming pool or
other location where the
temperature and humidity
are significantly different.
• There is risk of electrical shock,
malfunctioning.
Install this product in an
environment where the
temperature ranges from –10°C to
+45°C and the relative humidity is
less than 80%. It condensation is
expected to form, heat up the fresh
outside air using a duct heater etc.
Install this product in and
environments where the outside
air intake meets the following
conditions: temperature range
is between –15°C and +40°C and
the relative humidity is 80% or
less. Use the designated electrical
wires for the terminal board
connections, and connect the
wires securely so that they will
not become disconnected.
(Failure to ensure proper
connections may cause fire.) When passing metal ducts
through wooden buildings clad
with metal laths, wire laths or
metal, these ducts must be
installed in such a way that they
will not make electrical contact
with the metal laths, wire laths
or metal sheets. (Power leakage
can cause ignition)
More than
1m apar
t
Avoid fire equipment
• There is risk of tire.
When the product is soaked
(flooded or submerged), contact
an Authorized Service Center.
• There is risk of fire or eletric shock.
Don't touch a dedicated circuit
or breaker with wet hands.
• There is risk of electric shock.
■
Operation