![LG vc9700 Скачать руководство пользователя страница 12](http://html.mh-extra.com/html/lg/vc9700/vc9700_owners-manual_211714012.webp)
12
Before Operation-VCR part
Tuning in a video channel on
your TV
Notes:
The output frequency of this video recorder (VCR)
is set at UHF channel 36. If channel 36 is already
used by another TV station, or if the picture is dis-
torted, you can change the transmitter channel of
your VCR. Stages 5 ~ 8 will show you how to
change the output frequency of your VCR.
Your TV receives signals from the video recorder
(VCR) like another TV station. You have to select a
channel number on your TV and tune it in so that
you may watch video tapes. If you have used a
SCART or AUDIO and VIDEO cables then your TV
should already have a dedicated video channel
built into it, usually called
AV
.
1. Make sure that you have correctly installed your
VCR as described earlier in this book.
Press
POWER
to turn on your VCR.
Turn on your TV.
2. Insert a pre-recorded video tape into your VCR
and press
N
on the remote control.
Select a TV channel number on which you wish to
watch video’s. Don’t worry if you don’t have a
video-tape to play at this stage! If you switch your
VCR on and continue stages
3 ~ 4
, instead of see-
ing video playback tune your TV until you see a
bright blue screen.
3. Tune this channel until the video picture is sharp
and the sound is clear.
If you have used a SCART or AUDIO and VIDEO
cables you will not have to tune your TV, simply
select the AV channel. The
AV
channel is already
pre-tuned for optimum video playback on your TV.
4. Store this channel on your TV.
You will need to look at the TV instruction book if
you do not know how to do this.
5.
Only carry out stages 5 ~ 8 if you cannot
obtain clear video playback as described in
stages 1 ~ 4.
Select a TV channel number on
which you wish to watch video’s.
Make sure that your VCR is in standby pressing
POWER
on the remote control (only the clock will
be displayed).
6. Press
PROG
. (
3
/
4
) on the front of your VCR for
more than 4 seconds.
RF36
will appear in the display window.
The following picture will be displayed on the TV
screen.
7. Press
PROG
. (
3
/
4
) to select another video
channel. You may select any channel number
between 22 and 68.
You can also set it to “OFF” if there is any
interference when your TV is connected to the
VCR with a SCART lead.
8. Select a TV channel number on which you wish to
watch video’s.
Press
on the front of your VCR when you
have finished.
Tune this channel so that a bright blue screen
appears.
Store this channel on your TV.
Note:
Make sure that you have correctly installed your VCR
and successfully tuned in a dedicated video channel
on your TV. If you do not tune in a dedicated video
channel on your TV you will be unable to view and
record video tapes!
Using your VCR for the very
first time
Following picture will display on the TV screen
when you have just connected your video
recorder for the very first time.
To make tuning TV stations, please follow stages
3 to 4 as shown "ACMS" (see p.14).
I
A
N
NL
P
S
SF
OTHERS
B
D
DK
E
F
I
OK
i
Pr-12
ACMS
CH
i
RF CHANNEL 36
PSET
R
Содержание vc9700
Страница 43: ...P NO 3834RV0036U ...