background image

4

Room Air Conditioner

Safety Precautions

Indoor/outdoor wiring connections must

be secured tightly and the cable should

be routed properly so that there is no

force pulling the cable from the

connection terminals.

• Improper or loose connections can cause

heat  generation or fire.

Safely dispose off the packing materials.

Like screws, nails, batteries, broken

things etc after installation or svc and

then tear away and thraw away the plastic

packaging bags.

• Children may play with them and cause

injury.

Make sure to check that the power cable

plug is not dirty, loose or broken  and

then only insert the plug completely.

• Dirty, loose or broken power plug can

cause electric shock or fire.

Be sure to check the refrigerant to the

used. Please read the label on the product.

• Incorrect refrigerant used can prevent the

normal operation of the unit.

Don't use a power cord, a plug  or a loose

socket which is damaged.

• Otherwise it  may cause a fire or electrical

shock.

Do not touch , operate, or repair  the

product with wet hands. Hold the plug by

hand when taking out 

• There is risk of electric shock  or fire.

Do not place a heater or other heating

appliances near the power cable.

• There is risk of fire and electric shock.

Do not allow water to run into electric

parts. Install the unit away from water

sources.

• There is risk of fire, failure of the product, or

electric shock.

Do not store or use or even allow

flammable gas or combustibles near the

product. 

• There is risk of fire.

Do not use the product in a tightly closed

space for a long time. Perform ventilation

regularly.

• Oxygen deficiency could occur and hence

harm your health.

Do not open the front  grille of the product

during operation. (Do not touch the

electrostatic filter, if the unit is so equipped.) 

• There is risk of physical injury, electric shock,

or product failure.

If strange sounds, smell or smoke comes

from product.Immediately turn the breaker

off or disconnect the power supply cable.

• There is risk of electric shock or fire.

Ventilate the product room  from time to

time when operating it together with a

stove, or heating element etc.

• Oxygen deficiency can occur and hence harm

your health.

Turn the main power off and unplug the

unit when cleaning or repairing the

product. 

• There is risk of electric shock.

When the product is not to  be used for a

long time, disconnect the power supply

plug or turn off the breaker.

• There is risk of product damage or failure, or

unintended operation.

Take care to ensure that nobody

especially kids could step on or fall onto

the outdoor unit. 

• This could result in personal injury and

product damage. 

Take care to ensure that power cable

could not be pulled out or damaged

during operation.

• There is risk of fire or electric shock.

Do not place ANYTHING  on the power

cable.

• There is risk of fire or electric shock.

Do not plug or unplug the power supply plug to turn the unit

ON/OFF .

• There is risk of fire or electric shock.

When flammable gas leaks, turn off the gas and open a window

for ventilation before turn the product on. 

• Do not use the telephone or turn switches on or off. There is risk of

explosion or fire.

Two or more people must lift and

transport the product. 

• Avoid personal injury. 

Do not install the product where it will be

exposed to sea wind (salt spray) directly.

• It may cause corrosion on the product. 

Install the drain hose to ensure that the

condensed  water is drained away properly. 

• A bad connection may cause water leakage.

Keep level even when installing the

product.

• To avoid vibration or noise.

Do not install the product where the noise

or hot air from the outdoor unit could

damage or  disturb the neighborhoods.

• It may cause a problem for your neighbors

and hence dispute.

Always check for gas (refrigerant)

leakage after installation or repair of

product.

• Low refrigerant levels may cause failure of

product.

Содержание V12CFB-N




















Отзывы: