LG V-Net AC Smart II Скачать руководство пользователя страница 71 | Manualshive

Страница: 71 / 239

LG V-Net AC Smart II Скачать руководство пользователя страница 71

Installation/Owner's Manual

4-22

4. AC Smart II Menu

Item

Description

- Med: This sets the fan speed to med.
- High: This sets the fan speed to high.
- Auto: This sets to automatically measure the indoor level of contamination

and maintain the optimal condition.

Set whether rotate the fan automatically.
•

[Set]

: Execute the auto fan rotate function.

•

[Cannel]

: Stop the auto fan rotate function.

You can set the lock function of air condition so that the user cannot control
the air conditioner individually.
- All lock: Enable lock function.
- All unlock: This disables the lock function.
- Mode lock - This enables the Mode lock function so that the user cannot

individually control the operating mode of the indoor unit.

- Mode unlock - This disables the Mode lock function.
- Fan level lock - This enables the Fan level lock function so that the user

cannot individually control the fan level of the indoor unit.

- Fan level unlock - This disables the Fan level lock function.
- Set temperature lock - This enables the Set temperature lock function so that

the user cannot individually control the indoor temperature setting.

- Set temperature unlock - This disables the set temperature lock function.

You can limit the indoor temperature to be within a certain temperature range.
Here, the user cannot individually set the indoor temperature out of the set
temperature range.

Fan level

Wind direction

LOCK

Maximum/Minimum
temperature setting

[Ventilator, Eco V DX]

Item

Description

You can set the operation and stopping of the ventilator.
- Operation: You can operate the ventilator.
- Stop: You can stop the operation of the ventilator.

You can designate the operating mode of the ventilator.
- Heat: Both inlet/outlet go through heat exchange device for ventilation. Use this mode

during summer and winter when the difference between the indoor and outdoor is
significant in terms of temperature and humidity.

- Normal: The exhaust air is ventilated without going through the heat exchanger. Use

this mode during spring and fall when the difference between the indoor and outdoor
is not too significant in terms of temperature and humidity.

- Auto: This measures the indoor temperature and outdoor temperature and

automatically controls inlet and outlet. With this, the balance of the indoor air is
maintained to maintain the optimal condition.

Operation

Mode

«
...
69
70
71
72
73
...
»

Содержание V-Net AC Smart II
















































































































































































































































Отзывы:

Нет отзывов