LG V-CP663ST, Руководство пользователя

Страница: 5 / 12

– 5 –
E
Changing the dust bag
The dustbag needs changing when the cleaner is
set to maximum power and the cleaner head is
off the floor but the “bag full” indicator
window(18) is completely coloured red.
Even if the dustbag does not appear to be full
at this stage, it should be changed.
It could be that a great deal of very fine dust
has clogged up the pores of the dust bag.
• Turn off the appliance and unplug it.
• Open the cover by pressing the hook (19)
and lifting it up until it snaps into place.
Your appliance is equipped with either a paper
dust bag (20) or a fabric dust bag (22)
(depending on model).
• Take hold of the dust bag by the handle and
pull.Remove the bag and throw it away.
• To refit a new bag push the cardboard
support of a new bag into the bag mount (21)
until it will go no further.
If your appliance is fitted with a fab-
ric dust bag
follow the same instructions as
above.
Empty it and replace it (22).
Note: as the appliance is fitted with a safety
device which checks that the bag is in place
you cannot close the lid if the bag is not fitted
correctly.
Cleaning the motor filter
The motor filter is situated inside the appliance
between the dust bag and the motor. Each
time that you change the air outlet filter we
advise you to remove the motor filter (23) and
to clean it by tapping to remove the dirt and
then replacing it in the vacuum cleaner.
Changing the air outlet filters
• Depending on the model you have chosen
your appliance is equipped with different
types of filters : foam filter or electrostatic
filter or anti-odour charcoal filter(24).
• To change these filters remove the cover of
the filter compartment (25) situated at the
rear of the appliance.
• The foam filter should be cleaned regularly
by tapping it to remove the dirt.
• The electrostatic filter or anti-odor
charcoal filter should be changed regularly.
(approximately every 6 bag changes)
What to do if your appliance
does not work?
Check that the appliance is correctly plugged
in and that the electrical socket is working.
What to do when the suction
performance reduces?
• Stop the appliance and unplug it.
• Check that the tubes, flexible hose and
cleaning tool are not blocked.
• Check that the dust bag is not full. Replace if
necessary.
• Check that the air outlet filter is not blocked.
Replace if necessary.