LG V-CP243RDB, Руководство пользователя

Страница: 5 / 13

– 4 –
3828Fi2841B
Please read all the following information,
which contains important instructions for the
safety, the use and the maintenance of the
appliance.
This appliance complies with the following EC
Directives: -73/23/EEC, 93/68/EEC-Low
Voltage Directive-89/336EEC -EMC Directive.
■
Never allow children to use the appliance
unsupervised.
■
Do not use the appliance If the supply cord
is damaged or faulty.
■
If the mains lead is damaged, it must be
replaced by an approved LG Electronics
Service Agent in order to avoid a hazard.
■
Always switch the vaccum cleaner off
before :
• changing the dust bag.
• changing or cleaning the filters.
■
If no dustbag is inserted, the cover cannot
be closed. Please do not use force!
■
Do not vacuum flammable or explosive
substances(liquids or gases).
■
Do not vacuum hot ash, embers etc. nor
sharp objects.
■
Do not vacuum water or other liquids.
Connecting the flexible hose
Push the end of the head(1) on the flexible
hose(2) into the attachment point on the vac-
uum cleaner.
To remove the flexible hose from the
vacuum cleaner, press on the button(3) situ-
ated on the head, then pull upwards.
Assembling the tubes
• Metal tube(4)
- Fit together the two tubes by twisting
slightly.
Using the cleaning head and Accessory
Nozzles
Fit the large cleaning head onto the end of
the tube.
• The 2 position head(5) is equipped with a
pedal(6) which allows you to alter its posi-
tion according to the type of floor to be
cleaned.
Hard floor position(tiles, parquet floors...).
Press on the pedal to lower the brush.
Carpet or rug position. Press on the
pedal to lift the brush up.
• Crevice Tool(7)
For vacuuming in those normally inaccess-
ible places i.e. reaching cobwebs, or down
the side of a sofa!
How to plug in and use
Pull out the supply cord to the desired length
and plug into the socket.
Press button (9) to start the vacuum cleaner.
To stop it press the button (9) again.
Adjusting the power level
• If your appliance is equipped with an elec-
tronic variable power control(9), you can
choose the power appropriated for the
task. (depending on model)
• The flexible hose handle(10) has a manual air
flow regulator(11) which allows you to briefly
reduce the suction level.
Storage(12)
When you have switched off and unplugged
the appliance, press on the button (8) to
automatically rewind the cord.
You can move or store your appliance in a
vertical position by sliding the hook on the
large cleaning head into the clip on the
underside of the appliance.
Changing the dust bag
The dustbag needs changing when the cleaner
is set to maximum power and the cleaner head
is off the floor but the “bag full” indicator win-
dow(13) is completely coloured red.
Even if the dustbag does not appear to be
full at this stage, it should be changed.
It could be that a great deal of very fine dust
has clogged up the pores of the dust bag.
• Turn off the appliance and unplug it.
• Open the cover by pressing the hook(14)
and lifting it up until it snaps into place.
Your appliance is equipped with either a
paper dust bag (15) or a fabric dust bag
Information for your safety
How to Use
E