background image

-3-

SAFETY PRECAUTIONS

BEFORE OPERATING THIS VACUUM CLEANER, READ THIS SERVICE MANUAL THOROUGHLY,
AND OBSERVE EACH POINT CAREFULLY.

1. Motor filter(Air Cleaner)

1) This filter is reusable.

2) Never use the vacuum cleaner without filter.

It may damage the motor.

3) When the light of body is on, wash the motor filter

with water and brush.

4) Even if the light is not on, wash the motor filter at

least once 6 months.

NOTE :

Reusing of the motor filter.

Never wash the filter in a washing machine or in a
dishwasher.

Never use hot water for washing the filter.

Reuse the filter after drying it completely in the
shade for a day.

Do not dry near fire or direct sunray.

2. Exhaust filter(Washable HEPA filter)

1) This filter is reusable HEPA filter.

2) For clean air, theis filter must be assembled.

3) Wash the exhaust filter with water once a year.

4) When the light of body is on, wash the exhaust filter with

water. 

NOTE :

Reusing of the exhaust filter.

Never wash the filter in a washing machine or in a
dishwasher.

Never use hot water for washing the filter.

Reuse the filter after drying it completely in the
shade for a half day.

Do not dry near fire or direct sunray.

Do not brush the filter. This will cause permanently
damage allowing dust to by-pass the filter.

3. Avoid suction such materials as :

1) Liquid or wet dust :

Clogs the ventilation holes, reduces the suction
power significantly and harms the motor.

2) Inflammable liquids such as benzene, alcohol or

solvents.

3) Burning objects such as cigarette butts.

4) Bulky objects such as vinyl, paper etc.

5) Sharp objects such as needles, pins, metal, glass

particles etc.

4. Attachments

Nozzle : For cleaning wooden floor, the room floor

and carpet.

Crevice Tool : For cleaning any crevice, inside corners of

window frames. (However, do not use the
crevice tool more than 20 minutes.)

Dusting Brush: For delicate vacuuming of fabrics on the

furniture, curtains, etc.

Upholstery Nozzle: For vacuuming the dust on the 

upholstery.

However, do not use the crevice tool more than 20
minutes because it may cause harm to the motor.

5. Close supervision is necessary when this

vacuum cleaner is used by or near children.
Children’s carelessness may cause damage
to the cleaner or injure persons.

6. Air exhausted from the vacuum cleaner is

normally warm. But if extraordinarily hot air
is exhausted, check if the telescopic tube,
hose or clean filter is clogged or not.

7. Electric shock could occur if used outdoors

or on wet surfaces.

1. Motor exchange

1) Separate the Body Cover and Body Base by

unfastening the screws.

2) After disconnecting the lead wires, replace the old

motor with a new one.

2. In case of exchanging other parts. refer

to the exploded view.

CAUTIONS

BEFORE ATTEMPTING TO SERVICE OR ADJUST ANY PART OF THE VACUUM CLEANER, DISCONNECT
THE ELECTRICAL POWER SUPPLY CORD FROM THE WALL OUTLET.

LGE Internal Use Only

Copyright © 2007 LG Electronics. Inc. All right reserved.  
Only for training and service purposes

Содержание V-CA251NTB
















Отзывы: