LG UU09W Скачать руководство пользователя страница 3

Страница: 3 / 29

IMPORTANT SAFETY INSTRUCTIONS

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.

Always comply with the following precautions to avoid dangerous
situations and ensure peak performance of your product

WARNING

Serious injury or death can result if directions are ignores.

CAUTION

Minor injury or product damage can result if directions are ignored.

WARNING

• Installation or repairs made by unqualified persons can result in

hazards to you and others.
Refrigeration work must be performed by a qualified person who
is "F-Gas" registered.

• Installation work must be performed in accordance with the

National Electric Code by qualified and authorized personnel only.

• The information contained in the manual is intended for use by a

qualified service technician familiar with safety procedures and
equipped with the proper tools and test instruments.

• Failure to carefully read and follow all instructions in this manual

can result in equipment malfunction, property damage, personal
injury and/or death.

Installation

• Do not use a defective or underrated circuit breaker. Use the cor-

rectly rated breaker and fuse. There is risk of fire or electric
shock.

• For electrical work, contact the dealer, seller, a qualified electri-

cian, or an Authorized Service Center. Do not disassemble or
repair the product by yourself. There is risk of fire or electric
shock.

• Always ground the product as per the wiring diagram. Do not

connect the ground wire to gas or water pipes lightening rod or
telephone ground wire. There is risk of fire or electric shock.

• Install the panel and the cover of control box securely. There is

risk of fire or electric shock due to dust , water etc.

• Use the correctly rated breaker or fuse. There is risk of fire or

electric shock.

1,MFL68907813(영) 17. 8. 1. 영영 2:46 Page 3

Содержание UU09W






























Результаты поиска

Содержание UU09W

Отзывы:

Похожие инструкции для UU09W

Бренды по названию

Популярные бренды

LG UU09W, Руководство по установке

Результаты поиска

Содержание UU09W

Отзывы:

Похожие инструкции для UU09W

Бренды по названию

Популярные бренды