manualshive.com logo in svg

LG THERMA V Series, Руководство пользователя, Страница: 55 / 59

Поделиться
Скачать
LG THERMA V Series Скачать руководство пользователя страница 55

55

USING THERMOSTAT

ENGLISH

USING THERMOSTAT

The term "thermostat", which is widely used in this chapter,  is a kind of 3rd party accessory. 

LG Electronics does not  supply thermostat and it should be supplied 3rd party  manufacturers.

Room thermostat can be used for easy and convenience control. To utilize thermostat more

efficiently and correctly, this chapter presents information about using thermostat.

When thermostat is interlocked, the subject of Thermo On / Off is limited to the thermostat

How to use thermostat

To find how to turn on and off, how to set target temperature, how to change operating mode,

etc, please refer thermostat operating manual provided by thermostat manufacturer.

CAUTION

• Some electro-mechanical type thermostat has internal delay time to protect compressor. In that

case, mode change can takes time more than user's expectation. Please read thermostat
manual carefully if the product does not response quickly.

• Setting temperature range by thermostat can be different with that of the product. The heating

or cooling set temperature should be chosen within the setting temperature range of the
product. 

!

Содержание THERMA V Series




























































Отзывы:

Нет отзывов