LG Therma V CH Series Скачать руководство пользователя страница 24

Страница: 24 / 29

Air-to-Water Heat Pump

Using Thermostat

Emergency Operation

• Definition of terms

- Trouble : a problem which can stop system operation, and can be resumed temporally under

limited operation without certificated professional's assist.

- Error : problem which can stop system operation, and can be resumed ONLY after certificated

professional's check.

- Emergency mode : temporary heating operation while system met Trouble.

• Objective of introducing 'Trouble'

- Not like airconditioning product, Air-to-Water heat pump is generally operation in whole winter

season without any system stopping.

- If system found some problem, which is not critical to system operating for yielding heating

energy, the system can temporarily continue in emergency mode operation with end user's
decision.

• Classified Trouble

- Trouble is classified two levels according to the seriousness of the problem. : Slight Trouble and

Heavy trouble

- Slight Trouble : Sensor trouble. In most case, this trouble is concerned with sensor problems. The

unit is operating under emergency mode operation(level 1).

- Heavy trouble : Compressor cycle trouble. Emergency mode operation(level 2) is performed by

optional electric heater.

- Option Trouble : a problem is found for option operation such as water tank heating. In this

trouble, the troubled option is assumed as if it is not installed at the system.

• Emergency operation level

- When system met trouble, it stops operation and wait for userʼs decision : Calling service center

or starting emergency operation.

- To start emergency operation, user simply push ON / OFF button once more.

- Two different levels are prepared for emergency operation : High temperature cycle and low

temperature cycle.

- In emergency operation mode, user can not adjust target temperature.

※ It can not be operated, if the electric heater accessory is not installed.

High temperature cycle

OFF

50°C

24°C

70°C

Low temperature cycle

30°C

19°C

50°C

DIP

Switch

Target

Leaving Water

Temperature

Target

Room Air

Temperature

Target

Sanitary Water

Temperature

Содержание Therma V CH Series






























Результаты поиска

Содержание Therma V CH Series

Отзывы:

Похожие инструкции для Therma V CH Series

Бренды по названию

Популярные бренды

LG Therma V CH Series, Руководство пользователя

Результаты поиска

Содержание Therma V CH Series

Отзывы:

Похожие инструкции для Therma V CH Series

Бренды по названию

Популярные бренды