background image

Part 1

IMPORTANT SAFETY INSTRUCTIONS

• Read all instructions before using the dryer.
• Before use, the dryer must be properly installed as described in this

manual.

• Do not place items exposed to cooking oils in your dryer. Items

contaminated with cooking oils may contribute to a chemical reaction that
could cause a load to catch fire. 

• Do not dry articles that have been previously cleaned in, washed in,

soaked in, or spotted with gasoline, dry-cleaning solvents, or other
flammable or explosive substances as they give off vapors that could
ignite or explode.

• Do not reach into the dryer if the drum or any other part is moving.
• Do not repair or replace any part of the dryer or attempt any servicing

unless specifically recommended in this Use and Care Guide or in
published user-repair instructions that you understand and have the skills
to carry out.

• Do not tamper with controls.
• Before the dryer is removed from service or discarded, remove the door

to the drying compartment.

• Do not allow children to play on or in the dryer. Close supervision of

children is necessary when the dryer is used near children.

• Do not use fabric softeners or products to eliminate static unless

recommended by the manufacturer of the fabric softener or product.

• Do not use heat to dry articles containing foam rubber or similarly textured

rubber-like materials.

• Keep area around the exhaust opening and adjacent surrounding areas

free from the accumulation of lint, dust, and dirt.

• The interior of the dryer and exhaust vent should be cleaned periodically

by qualified service personnel.

• Do not install or store the dryer where it will be exposed to the weather.
• Always check the inside of the dryer for foreign objects.
• Clean lint screen before or after each load.
• Do not dry unwashed items in the tumble dryer.
• Items that have been soiled with substances such as cooking oil,

acetone, alcohol,petrol,kerosene,spot removers, turpentine, waxes and
wax removers should be washed in hot water with an extra amount of
detergent before being dried in the tumble dryer.

• Items such as foam rubber(latex foam), shower caps, waterproof textiles,

rubber backed articles and clothes or pillows fitted with foam rubber pads
should not be dried in the tumble dryer.

• Fabric softeners, or similar products, should be used as specified by the

fabric softener instructions.

• The final part of a tumble dryer cycle occurs without heat(cool down

cycle) to ensure that the items are left at a temperature that ensures that
the items will not be damaged.

Your Safety and the safety of others is very important.

BASIC SAFETY PRECAUTIONS

You can be killed or seriously injured if you don’t immediately follow instructions.

You can be killed or seriously injured if you don’t follow instructions. 
All safety messages will tell you what the potential hazard is, tell you how to reduce the

chance of injury, and tell you what can happen if the instructions are not followed. 

We have provided many important safety messages in this manual and on your appliance. Always read and obey
all safety messages.

This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word DANGER or WARNING. These words
mean:

READ ALL INSTRUCTIONS BEFORE USE

For your safety, the information in this manual must be followed to minimize the risk of

fire or explosion, electric shock, or to prevent property damage, personal injury, or loss of life.

DANGER: 
WARNING:

To reduce the risk of fire, electric shock, or injury to persons when using this appliance,
follow basic precautions, including the following:

WARNING:

WARNING

Never stop a tumble dryer before the end of the drying cycle   unless all items are

quickly removed and spread out so that the heat is dissipated.

WARNING:

• The lint trap has to be cleaned frequently, if applicable. 

• Lint must not to be allowed to accumulate around the tumble dryer. 

• Adequate ventilation has to be provided to avoid the back flow of gases

into the room from appliances burring other fuels, including open fires.

• The appliance is not intended for use by young children or infirm persons

without supervision.

• Young Children should be supervised to ensure that they do not play with

appliance.

3

Содержание TD-V10137E





















Отзывы: